Clay bar is a conventional compound that truly cleans and smoothes the vehicle surface and removes surface contaminants which are not ordinarily removed during the washing/waxing process.

When used as directed, it is effective in removing surface contaminants such as rail dust, industrial fallout, tree sap, bug residue, paint overspray and any other strongly adhered foreign matter.

Directions:

1. On a freshly washed vehicle, mist a 2 ft. x 2 ft. area of paint with Universal Clay Lubricant.
2. Gently rub the clay bar back and forth across the wet area only. It will grab initially. This is the clay grabbing contaminants that protrude above the clear coat surface. When the clay glides freely, the surface is clean.
3. Wipe off the area with a clean Microfiber Towel. Use the clay lubricant to remove any remaining clay residue.
4. Before moving on to the next section, inspect the clay to see if it appears soiled. If so, reshape the clay to reveal a clean side. If you drop the clay on the ground, discard it.
5. Re-apply release liner to each side of bar when placing bar into container after use as this will keep the bar from sticking to the container.
6. Do not lubricate clay bar prior to storage, NEVER PUT IT INTO A PLASTIC BAG!!!!

Qty 2, 2x60gr

USA Customers: Due to Patent laws in the USA this product can not be shipped to the USA.

This product will be only shipped and used at a Canadian address, with the intent not to redistribute back in the USA.